ASML is one of the world’s leading manufacturers of chip-making equipment.
Our vision is to enable affordable microelectronics that improve the quality of life.
To achieve this, our mission is to invent, develop, manufacture and service advanced technology for high-tech lithography, metrology and software solutions for the semiconductor industry.
ASML's guiding principle is continuing Moore's Law towards ever smaller, cheaper, more powerful and energy-efficient semiconductors. This results in increasingly powerful and capable electronics that enable the world to progress within a multitude of fields, including healthcare, technology, communications, energy, mobility, and entertainment.
Electronics Supply Chain Engineer
Introduction
ASML US, LP brings together the most creative minds in science and technology to develop lithography machines that are key to producing faster, cheaper, more energy-efficient microchips. We design, develop, integrate, market and service these advanced machines, which enable our customers - the world’s leading chipmakers – to reduce the size and increase the functionality of their microchips, which in turn leads to smaller, more powerful consumer electronics.
Our headquarters are in Veldhoven, the Netherlands, and we have 18 office locations around the United States including main offices in Wilton, CT, Chandler, AZ and San Jose, CA.
ASML supports the semiconductor industry’s ongoing quest for producing faster, smarter and more energy efficient chips. We are a young, dynamic, international and highly skilled workforce. ASML creates the systems that the lithography industry needs to achieve its goals. This can only be accomplished with a strong support of our suppliers.
We are looking for a Supplier Engineer that takes a pivotal role as a linking pin between the ASML D&E development team and the related development team of the supplier, with a primary focus on parts quality.
Job Mission
As a Supply Chain Engineer in the Electronics Department, you will be operating in a fast paced and multidisciplinary development environment. The SCE maintains and develops at an operational level the relation to the supplier with the purpose to create an optimal engineering collaboration between supplier and ASML to industrialize new electronic assemblies for volume production
Using your technical and personal skills, you will work closely together with the supplier & ASML development teams to optimize the effectiveness and efficiency of the product generation process, in alignment with the ASML project plan. The main goal of this cross-sector activity is to secure an excellent quality of parts delivered by our suppliers.
Job Description
Within the D&E project, the SCE is primarily responsible to ensure lean process development resulting in a high level of parts quality from our suppliers. Using your in-depth technical knowledge, analytic thinking, political antenna and excellent people skills, you work closely with the ASML procurement team and the supplier to build up an intimate knowledge of their IP and technological capabilities.
The main responsibilities are:
-Early supplier involvement in the D&E project to secure that technology expertise of ASML and supplier are merged in the best way.
-Ensure that not only parts quality, but also manufacturability, testability and serviceability aspects are covered in the design phase.
-Document the D&E project collaboration, including supplier & ASML responsibilities and roles via a Statement of Work (SoW).
-New product introduction (NPI) and supplier selection.
-Deliverables that secure parts quality and cost targets from suppliers in the ASML product generation process, such as: acceptance of the design and/or specification of Complete & detailed parts qualification process; acceptance of qualified parts; Lean Process development and flow including Process failure mode effect analysis; first article inspection
-Define and maintain supplier interface processes, such as: issue resolution; qualification deviation; configuration management; ASML factory disturbances
-Contribute to supplier development to improve operational excellence by driving execution of existing agreements, improvement actions, and participation in supplier audits. The SCE is part of the D&E project team and, therefore, interfaces with project leaders, design engineers, architects, manufacturing & customer support engineers, logistics, procurement, etc.
-Frequent travelling to (global) suppliers is required.
Education
BSc or MSc in Electronics in the area of Electro-mechanics. or equivalent experience
Experience
-8+ years experience in high tech development environment with a focus on supplier management, part quality and outsourcing.
-Experienced designer or test developer who has gained experience in the areas of Quality systems and –methodologies (Six Sigma Green or Black belt is a must), as well as Engineering towards production processes:
-3+ years of experience designing boards and cables.
-5+ years of experience in manufacturing test experience: experience in PCB visual and functional testing, In-Circuit Test (ICT) and cable testing as a minimum.
-Manufacturing processes experience: detailed knowledge of manufacturing techniques for cables/connectors, PCB Assembly, programmable logic and electrical rack/cabinet assembly
Personal skills
The following personal skills are crucial to a successful execution:
-Ability to initiate, influence and steer without formal authority.
-Strong networker with good negotiating and team building skills
-Strong verbal and written communicator.
-Ability to switch between complex matters and high-level conclusions.
-Self-propelling, showing initiative and drive.
-Flexible, result driven and committed.
-Team player
-Process oriented
Context of the position
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
-While performing the duties of this job, the employee routinely is required to sit; walk; talk; hear; use hands to keyboard, finger, handle, and feel; stoop, kneel, crouch, twist, reach, and stretch.
-The employee is occasionally required to move around the campus.
-The employee may occasionally lift and/or move up to 20 pounds.
-May require travel dependent on company needs.
-Specific vision abilities required by this job include close vision, color vision, peripheral vision, depth perception, and ability to adjust focus.
-Can work under deadlines.
-The environment generally is moderate in temperature and noise level.
-Must be able to read and interpret data, information, and documents.
-Can observe and respond to people and situations and interact with others encountered in the course of work.
-Can learn and apply new information or skills.
Please apply with your CV and cover letter by the 'apply' button below
Remember - you found this opportunity on Qreer.com
Education Backgrounds: |
Business Engineering Electrical Engineering Mechanical Engineering |
Specialties: |
Electronics / Components Manufacturing Marketing Procurement / Legal Supply Chain |
Education Level: |
Undergraduate (Bachelors) Postgraduate (Masters) |
Experience: |
10 - 15 years 2 - 5 years 5 - 10 Years |
Languages spoken: |
English |
Job Location: | Wilton, United States |
Type: Job
Deadline: 1st August 2019
Job reference (ID): 13036
Loading...